Most appliances require maintenance, yet they’re still neglected, which diminishes the life cycle of the equipment. Oftentimes, appliance filters can be difficult to clean because of the intricate parts. If you’re wondering about dryer vent cleaning Dallas Tx experts say a lack of maintenance can be the cause of bad odors that transfer to clothing, or even worse, it could start a fire.

According to the US Fire Administration, fires in more than 2,900 clothes dryers are ignited annually, and the main cause of these fires is a build-up of excessive lint. Any load of laundry that ends up in your dryer contains lint, mostly small particles of fabric and fiber that are released from the clothing.

Experts warn that the accessible lint filter does not catch all those particles released from clothing. A large amount of that debris becomes trapped within the gaps of the dryer and the vent hose, and some moves out towards the exterior home’s venting causing a bigger blockage.

The higher heat output from clothes dryers exacerbates the problems of lint buildup, experts point out. Fires are most likely to occur from two places: the dryer vent and the lint trap. Why these two places? Because clothes dryers are often not ventilated properly, and these vents typically are not being cleaned regularly. For this reason, safety standards for dryers have been developed, and most dryer instructions include warnings about lint build-up, which most consumers don’t bother reading.

Vents Require Deeper Cleaning

After each use of the dryer, your lint filter should be cleaned. This prevents the unit from accumulating an excessive amount of debris in the ventilation pipes. However, even with regular cleaning, you can not completely prevent build-up.

Your dryer and vent system require special brushes. Vacuum fixings do not have self-cleaning mechanisms, so the appliance cannot remove lint from the walls of the channel. Also, when performing DIY vacuuming of the unit, you simply cannot penetrate deep enough into the housing of the dryer.

Experts use specific brushes with long bristles to clean the areas beyond ​the lint filter, as well as small flexible brushes that can extend into and around corners and other inaccessible areas.

Warnings of a Venting Problem

According to the Commission Consumer of Product Safety, consumers can reduce the risk of dryer fires caused by overheated dryers by being observant for warning signs.

  • Do articles of clothing take longer to dry? or clothes are not drying completely during one cycle?
  • The outside of the dryer becomes very hot, yet the clothes are not dry
  • Odor is coming from inside or outside of dryer

These are warning signs that a unit requires maintenance.

Thoroughly Cleaning Your Unit

Dryers should be cleaned inside the unit, behind and underneath to remove any lint and dust particles. Depending on usage, every year, a qualified dryer servicing professional must clean the inside of the dryer housing to minimize the build-up of lint.

Also, the flexible vent exhaust should be cleaned. This is the tubing that leads from the back of the dryer to exterior of home. The outside opening to the vent should be checked for any debris, like grass, mulch or bird’s nesting.

It can easy to forget or ignore routine maintenance by an expert, but the result could be a fatality.